Bruchmechanik ternärer Polymermischungen: Mehrskalenmodellierung unter Berücksichtigung verarbeitungsinduzierter Morphologieeffekte

Statik starrer Körper (WS2020/2021)
Mechanik heterogener Festkörper (SS2020)
Bruch- und Schädigungsmechanik (SS 2019)
Dynamik (WS 2017/18)
Bruch- und Schädigungsmechanik (SS 2017, SS 2018)
Statik starrer Körper (WS 2016/17)
Festigkeitslehre (SS 2015, SS 2017)
Einführung in die Kontinuumsmechanik (SS 2016)
Anwendungsorientierte Materialtheorien (WS 2015/16, WS 2019/20)

Rutsch, Felix: Optimierung des Querschnittes eines Balkens unter Eigengewicht (BA, 2019)

Laschütza, Tobias: Numerical study of adiabatic temperature effects during fracture of thermoplastic polymers (MA, 2018)

Ruge, Johanna: Entwicklung eines viskoplastischen Werkstoffmodells für gummimodifizierte thermoplastische Kunststoffe (MA, 2017)

Naumann, Johanna: Bruchmechanische Experimente an Kunststoffen unter optischer Verformungsanalyse mittels digitaler Bildkorrelation (BA, 2015)

Hund, J., Seelig, Th.: Application of different plasticity models to PC/ABS blends within micromechanical approaches. PAMM Proc. Appl. Math. Mech. 19(1), e201900093, DOI

Hund, J., Naumann, J., Seelig, Th.: An experimental and constitutive modeling study on the large strain deformation and fracture behavior of PC/ABS blends. Mechanics of Materials 124, 132-142, 2018, DOI

Hund, J., Seelig, Th.: Multiscale modeling of thermoplastic PC/ABS blends. PAMM Proc. Appl. Math. Mech. 17, 417 – 418, 2017, DOI

Hund, J., Naumann, J., Seelig, Th.: Comparison of dilatant plasticity models in application to rubber-toughened polymers. PAMM Proc. Appl. Math. Mech. 16, 349-350, 2016, DOI

Hund, J., Leppin, C., Böhlke, T., Rothe, J.: Stress-strain characterization and damage modeling of glass-fiber-reinforced polymer composites with vinylester matrix. Journal of Composite Materials, 2016, DOI

J. Hund, T. Seelig: Computational study of morphological effects on the deformation and fracture behavior of PC/ABS blends. 29th International Workshop on Computational Mechanics of Materials Dubrovnik, September 15 − 18, 2019

J. Hund, T. Seelig: Application of different plasticity models to PC/ABS blends within a micromechanical unit cell approach. 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Vienna, Austria, February 18-22, 2019

Hund, J., Seelig, Th.: Micromechanical analysis of composition dependent failure in thermoplastic PC/ABS blends at high strain rates. 28th International Workshop on Computational Mechanics of Materials (IWCMM28), Glasgow, UK, September 10-12, 2018

Hund, J., Seelig, Th.: Micromechanical analysis of failure in thermoplastic PC/ABS blends. European Mechanics of Materials Conference (EMMC16), Nantes, France, March 26-28, 2018

Hund, J., Seelig, Th.: Multiscale modeling of failure in thermoplastic PC/ABS blends. 27th International Workshop on Computational Mechanics of Materials, Leuven, Belgium, September 20-22, 2017

Hund, J., Seelig, Th.: Multiscale modeling of fracture in thermoplastic PC/ABS-blends. 5th International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC), Nantes, France, June 14-16, 2017

Hund, J., Seelig, Th.: Multiscale modeling of thermoplastic PC/ABS-blends. 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar, Germany, March 06 - 10, 2017

Hund, J., Seelig, Th.: Modeling of rubber-toughened polymers using dilatant plasticity models. European Mechanics of Materials Conference (EMMC15), Brussels, Belgium, September 7-9, 2016

Hund, J., Naumann, J., Seelig, Th.: Comparison of dilatant plasticity models in application to rubber-toughened polymers. GAMM 2016, Braunschweig, Germany, March 7-11, 2016